Issue#546440: Ubnt - Controller can't see adoptable AP - OpenSUSE Linux

  • I'm having an issue where my controller software and the discover tool can't see an adoptable UniFi AP-AC-Lite with the OpenSUSE firewall enabled. If I disable the firewall the AP appears with no issues.

     

    I have the OpenSUSE firewall set to pass TCP ports 8080, 8443, 8843 and 8880 and UDP port to pass 3478. The controller is able to see and manage already adopted APs and if I disable the firewall, see and adopt the adoptable AP. When I renable the firewall after adoption I can still see and manage the AP. 

     

    Any idea what my issue with the initial adoption process could be would be appreciated.

    0 Answers

    Sorry, your answer is too short !

  • Issue#58266: Ubnt - how to upgrade ubiquiti controller 4.7.6 (installed in Debian GNU/Linux 7) to 4.8.12?

    I need to upgrade controller, I have backup of my sites and system.properties.  regards.

  • Issue#169575: Ubnt - Controller Software Issue

    Still new to Ubiquiti. Finally ordered some of their products and I am trying to get a few APs setup. I downloaded the latest software from the download site. Went to install it and it tells me I need Java and then proceeds to send me to java to download it. I do. Installer is still telling me I need Java even after I downloaded and installed it. What is going on?

  • Issue#195473: Ubnt - UniFi v4.8.12 Controller for Linux Install Guide?

    Is there an update to date guide for installing on Debian? It seems like most of what is out there is dated. I'd rather not blindly shotgun a bunch of commands into my fresh install.

  • Issue#200999: Ubnt - UnifFi Controller - Linux Mint

    Hello  I tried to install the Unifi Controller for Linux Mint, and followed following how to .During the whole process of installation, no particular problems, but when i try to acces it (http://localhost:8443/ )I only get a few non-printable characters.So i tried an update, an everything seems to install itself correctly : * Stopping Ubiquiti UniFi Controller unifi [ OK ] Décompactage de unifi (4.8.14-7436) sur (4.8.12-7387) ... Removing any system startup links for /etc/init.d/unifi ... /etc/rc0.d/K08unifi /etc/rc1.d/K08unifi /etc/rc2.d/S92unifi /etc/rc3.d/S92unifi /etc/rc4.d/S92unifi /etc/rc5.d/S92unifi /etc/rc6.d/K08unifi Traitement déclenché pour ureadahead (0.100.0-16) ... ureadahead will be reprofiled on next reboot Paramétrage de unifi (4.8.14-7436) ... Adding system startup for /etc/init.d/unifi ... /etc/rc0.d/K08unifi -> ../init.d/unifi /etc/rc1.d/K08unifi -> ../init.d/unifi /etc/rc6.d/K08unifi -> ../init.d/unifi /etc/rc2.d/S92unifi -> ../ini

  • Issue#202262: Ubnt - UniFi Controller Linux Reload Causing Factory Default

    Running UniFi Controller (4.6.3 at the time) on a  Ubuntu 14.04.2 LTS. I shutdown the service (service unifi stop) then started it back up (service unifi start) and the controller was not respoding. I then proceded to reload the controller (service unifi reload). To my surprise after the controller reloaded the mongodb database looked to be factory default and the controller was wanting me to go through setup wizzard as if a new install of UniFi.  I'm curious if anyone else had expereinced this with UniFi and any method to recover the database. From what I gathered it looks like UniFi thought it was its first time running and had mongodb wrote over the existing database directory with a new directory and database files.  Currently looking into recoving deleted / overwritten files in Linux but interested if anyone encouterd this issue before and what they did to resolve the issue (aside from factory defaulting all APs and re-intergrating them into

  • Issue#214781: Ubnt - Crashed 2.4.6(?) Linux Controller Server: Recover Database?

    Hey all, I'm trying to save a Ubuntu 12.04 server with an older (must be 2.4.6 or earlier) controller install on it. The system drive is still accessible.  I can mount it on another system. Is there a way I can extract the database from the drive, so I can import it to a fresh install (this time with 4.x?) Thanks,MAtt 

  • Issue#264306: Ubnt - Airfiber ssh algorythm issue w/ modern linux (ubuntu 16.04, rhel7)

    The AF5X firmware 3.2 seems to be missing secure ssh algorythms. ssh: connection to AF5X exited: no matching algo enc c->sssh: connection to AF5X exited: no matching algo kex Which causes CRM Control to not be able to log in. I dont know what algorythms are compiled into dropbear on the AF5X, so I can't add them to the Linux box hosting CRM Control. Ideas?

  • Issue#280415: Ubnt - cloud key v.0.4.4 with controller 4.8.14-7436 speeed limit issue

    Hello community.  I am having an issue with my unifi network.  wanted to share to see if i'm not the only one and to see if there is fix. let me explain.  I have two SSIDs one for guests and one for staff.  the guests have a speeed limit of 6000down and 1500 up.  the staff have a limit of 9000 down and 2500 up.  this is accomplished via two user groups.  Under wireless networks i have guest default to the guest user group and the staff defaults to the staff user group.  it's been working just fine.  I recently moved my controller to a shinny new cloud key.  I have an iphone that connects to the staff wireless but for that individual client configuration i have changed it to usergroup default with no speed limits.  This seems to work fine for a while but after a while of moving around the site which has 6 UAPs and 1 AC-LR i check the speed again and that clients speed is being limited to the staff speeds even though i had changed it

  • Issue#316776: Ubnt - [solved] Unifi Controller on Linux not starting correctly

    Hey, I am currently running an Ubuntu 14.04 system where I have a weird issue; This is a newly installed system, where the controller was running once, but it was uninstalled. After reinstalling the same version of the same .deb file I am now facing the issue that I cannot access the GUI.When the installation finished I restarted the system and was able to get the "wizard" page of the GUI. However, the page never loaded completely, but only showed the loading circle. After about 10 minutes or so I refreshed the page, only to be greeted with: Unable to connectFirefox can't establish a connection to the server at 192.168.3.100:8443. Weird thing is that the service is stated as running:***@*****:~$ sudo /etc/init.d/unifi status * unifi is running but that netstat is not showing anything for the "normal" ports, for eg. 8443, etc. Also, I was under the impression that /usr/lib/unifi should have the system.properties once the controller started for the

  • Issue#334033: Ubnt - NTP Server Setting (Linux Unifi Controller)?

    I'm finding references to how to do this, but none of them appear to be valid, any longer.  (E.g.: Mentions of site config files that simply do not exist.) So how do I set a site-wide ntp server config and get it pushed to my AP? I [i]did[/i] find a device config, and set it in there, but I'm not certain of how to push the new setting to the device without restarting it. Thanks,Jim 

  • Issue#338009: Ubnt - Unifi controller voucher issue

    Hi,I've got a client (motel) who has sent me this message about their unifi AP's which talk to a unifi controller in the cloud "We seem to be getting a lot of drop outs, ie 3 day voucher not working after one day? Also a lot of vouchers not valid." We have another caravan park using the vouchers with the same controller and they haven't mentioned any issues. Would an invalid voucher only theoretically occur if the unifi controller was not available (such as their internet dropping out or the unifi server not responding), or could I be suffering databaae issues with mongodb The controller's uptime is 31 days (which is when I manually rebooted it), and the logs in unifi GUI don't show anything to do with hotspot voucher rejections or failure etc etc.Is there another log I can access through the cmdline on the unifi controller that might help me see what's going on? Has anybody else experienced this and can shed some light on the issue? Thanks,

  • Issue#448143: Ubnt - Unifi Controller Issue

    I'm getting this error on var/log/unifi/server.log after i reboot the ubuntu server. I rebooted my server,ERlite, Modem since some of the clients who was able to connect before now the guest portal wound't display anymore.  Thanks,

  • Issue#461836: Ubnt - How to install unifi controller with Mongodb 64 bit in Linux Debian

    Does any one know what are the steps or commands to instal unifi controller with Mongodb 64 bit?

  • Issue#469081: Ubnt - UVC-Micro issues since 3.2...Controller issue?

    since upgrading to 3.2.0 (3.2.1 & 3.2.2) the UVC-Micro's have exhibited the following : - randomly disconnecting and reconnecting from the controller. In version 3.1.4 this simply did not happen.- push-to-talk does not work on any of 3 units currently installed. This is from iPhones, iPods and iPad minis all running the latest version of the iOS app sounds like it is a controller issue, any thoughts?

  • Issue#500126: UBNT Linux controller

    Hi,I an trying to install linux based coontroller by follwoing this ink...http://jcutrer.com/howto/networking/ubnt/install-unifi-controller-on-ubuntu-linuxI am receivng the below errors...[email protected]:~$ sudo apt-get update[sudo] password for syed:Err http://www.ubnt.com stable InReleaseErr http://www.ubnt.com stable Release.gpgUnable to connect to www.ubnt.com:http: [IP: 52.8.33.107 80]Err http://gb.archive.ubuntu.com trusty InReleaseErr http://gb.archive.ubuntu.com trusty-updates InReleaseErr http://gb.archive.ubuntu.com trusty-backports InReleaseErr http://gb.archive.ubuntu.com trusty Release.gpgCannot initiate the connection to gb.archive.ubuntu.com:80 (2001:67c:1560:8001::11). - connect (101: Network is unreachable) [IP: 2001:67c:1560:8001::11 80]Err http://gb.archive.ubuntu.com trusty-updates Release.gpgCannot initiate the connection to gb.archive.ubuntu.com:80 (2001:67c:1560:8001::11). - connect (101: Network is unreachable) [IP: 2001:67c:1560:8001::11 80]Err http://gb.ar

  • Issue#595145: Ubnt - UniFi Wireless Controller Linux Install - Video Tutorial

     https://www.youtube.com/watch?v=jb1f4BUC-Y4  Let's install UniFi 4.8.18 My installs are all Linux, so I'm assuming you have a Debian or Ubuntu server with a static IP. Get link to software. https://download.ubnt.comDownload to server.Install - Fix dependancy issues if needed. "sudo apt-get -f install"Setup the server! This is all you need to get up and going on a Linux based UniFi controller! 

  • Issue#654296: Ubnt - CloudKey Controller Password Issue

    Hi everyone, I'm running v4.8.14 on my cloudkey.  I can still get into the key itself, but my password for the controller isn't working and I'm not sure why... The main reason why I need access is my iPad will start connecting/disconnecting repeatedly until I powercycle my UNIFI AC Pro.  I suppose that might be a seperate topic until I gain access...    I clicked the forgot password link, but I haven't received anything. When I go to https://unifi.ubnt.com I don't see the cloudkey, but when I click find cloudkey, it does bring up my key.  It says adopted, and I can manage - but then it starts the same loop over again where I don't have access to the controller (note I can get into the key itself to look at firmware, etc.)  What are my options right now?   I'm only using this for a residential solution, so I can rebuild it from scratch fairly easily if I have to. 

  • Issue#718527: Ubnt - Unifi Controller 5.06 Hotspot Voucher Manager login issue

    Anybody experiencing unable to login to voucher manager? screenshot account below are existing and i have tried several times. Unable to login with correct username and password. The URL is the same as before.  https:/xxxxxxx:8443/manage/hotspot/account/login/0ed2y1wj and was redirected to this link https://xxxxxx:8443/manage/hotspot/account/login/0ed2y1wj?redirect=~2Fhotspot~2F

  • Issue#751410: Ubnt - Cloud Key Issue - Controller wont start

    We have a unifi cloud key with firmware v 0.5.0 and the controller wont start. i go to the ip of the controller and get 2 options, manage cloudkey or manage controller. manage cloudkey works fine, but the manage controller times out and wont open. cant directly browse it either with port 8443. any suggestions?

  • Issue#761346: Ubnt - issue with: Unifi Controller 4.8.19-160608 for synology DSM 6.0.1-7393

    Hi, I am actually running my controller on windows-notebook and now I tryed to install the controller on my Synology-NAS. The installation is successfull but it is not possible to start the application. It always stops with message "could not start". Log is empty.I am using a DS215j (Prozessor: MARVELL Armada 375 88F6720) with DSM 6.0.1-7393.Does someone has the same problem or an idea for solving the problem?regards,Sebastian 

  • Issue#767601: Ubnt - Here's a better init script for UniFi Controller on Linux

    I was in a tinkering mood today, so I wrote a slightly improved init script for running the UniFi Controller on Linux (I use CentOS). It creates a PID file, adds the ability to ask for status, and uses the green success "OK" and red "FAILURE" when appropriate. https://gist.github.com/stevejenkins/58b3542a257b601696e51bf6c41e3f37 Suggestions for improvements are always welcome. Enjoy!

  • Issue#798143: Ubnt - Win - Running Unifi Controller as service, firewall issue

    Hi,I'm trying to follow this guidehttps://help.ubnt.com/hc/en-us/articles/205144550-UniFi-Run-the-controller-as-a-Windows-service I'm setup java x64 and x32 on WHS2011.The service is running.I've added a firewall rule for TCP to the port that UniFi Controller uses on the WHS2011 server. But my two UniFi AC Pro access points shows up in red in the controller dashboard. They are not discovered.What rule do I need to add to the WHS2011 firewall in order for them to be discovered?  - Chr

  • Issue#798236: Ubnt - Solved. Win - Running Unifi Controller as service, firewall issue

    Hi,I'm trying to follow this guidehttps://help.ubnt.com/hc/en-us/articles/205144550-UniFi-Run-the-controller-as-a-Windows-service I'm setup java x64 and x32 on WHS2011.The service is running.I've added a firewall rule for TCP to the port that UniFi Controller uses on the WHS2011 server. But my two UniFi AC Pro access points shows up in red in the controller dashboard. They are not discovered.What rule do I need to add to the WHS2011 firewall in order for them to be discovered?  - Chr

  • Issue#819186: Ubnt - Can't access Linux UniFi Controller after SSL Certificate Import

    I have an existing and valid SSL cert for the web server on which I run my hosted UniFi controller. I decided to import it for use with the controller to avoid the additional step of telling Chrome it's OK to proceed to an unsecured site. I did the following from the command line: [[email protected] UniFi]# sudo java -jar lib/ace.jar import_cert /etc/pki/tls/certs/hostname.example.com.crt /etc/pki/tls/certs/startssl-ca-bundle.pem parse startssl-ca-bundle.pem (PEM, 18 certs): found [CN=StartCom Certification Authority] found [CN=StartCom Certification Authority G2] found [CN=StartCom Certification Authority] found [CN=StartCom Certification Authority] found [CN=StartCom Certification Authority] found [CN=StartCom Class 1 Primary Intermediate Client CA] found [CN=StartCom Class 1 Primary Intermediate Domain Controller CA] found [CN=StartCom Class 1 Intermediate CA - Mobile Experts sp. z o.o.] found [CN=StartCom Class 1 Intermediate CA - The City of Osmio] found [CN=

  • Issue#822336: Ubnt - Script for easy UniFi Controller upgrades on Unix/Linux systems

    I've automated (and improved) the steps from my blog post on upgrading UniFi Controller software versions on non-Debian Linux boxes (like CentOS). I've written a script that completely automates the UniFi Controller upgrade process. Just edit the version number of the UniFi Controller software you want to install, and the script will stop the service, back up your existing version, erase a previous backup, download the software from UBNT and extract it, copy your existing data into the new controller, then re-start the controller. Suggestions for improvements are always welcome. https://gist.github.com/stevejenkins/e35594a04fe9f3a7b0753aef4c500451 FYI - the script assumes you have a controller startup script that obeys "service UniFi start" and "service UniFi stop" -- though those commands can be easily editied in the script. You can download my SysV or systemd controller startup files here: http://wp.me/p1iGgP-2wl

  • Issue#850698: Ubnt - Unifi controller on Linux firewall/gateway router.

    Been using the UniFi controller and APs for a few years now in a Windows environment, but for a side project, I'm looking to build a wireless hotspot at a remote location with a DSL line with a public IP. Don't want to spend a lot of money to put in anything to fancy, but I still want more control over the network than I can get from off the shelf consumer routers. I'd like to keep the footprint down as well so I'm toying with the idea to put the Unifi Controller on a dual NIC'ed Ubuntu linux box that will be perform firewall/gateway/dhcp and maybe webfiltering functions for a small network that will support about 20 clients. Are there any known issues with running the controller software on the same hardware as the other network functions?

  • Issue#885415: Ubnt - Issue with Controller Possibly

    I'm running into the issue with 5.0.7 that anytime the controller is rebooted, my USG Pro is stuck in the "Adopting" status and cannot be managed or viewed. Only fix I've found so far is to SSH into the USG and reboot it. Also, occasionally with my UniFi 16 port poe switch, I lose the ability to configure it. When selecting the device, the configuration tab does not show. Either rebooting the switch or the controller appear to bring it back. But if I reboot the controller, I get hit with the USG issue...

  • Issue#900716: Linux - ICE1712 [Envy24] PCI Multi-Channel I/O Controller (input issue)

    Greetings, I have a 'Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02)' The output of the soundcard to my stereo (via RCA cable) works well. However, I now need to 'digitize' some cassettes. I borrowed a very nice cassette deck and routed the output to a pre-amp (Yamaha RX-397), set the amp on 'tape monitor mode'and routed an RCA cable to an input port of my soundcard. So far no signal or levels are shown. When I hit record, the signal is flat. However, there are levels on the cassette deck. I checked alsa, pavaucontrol, KMIX, I also installed Mudita24 but still no input levels. My recording software available is Ardour (4.7) and Audacity (2.1.1). I can install others if needed. I am running Slackware 14.2, 64 bit. My GUI is KDE. Does anyone have experience with this soundcard? What do you suppose the issue could be? I was advised by some audio engineers that this card is quite good, but is sophisticated and just nee

  • Issue#923023: Ubnt - issue upgrading unifi controller from ver 3 to ver 4

    l have a client that had setup on their nvr unit the unifi controller,at the moment they are running version 3 and i am wanting to upgrade it to ver 4 then ver 5.i have ssh'ed onto the nvr and trying to do a sudo apt-get update but getting the following issue,would anyone know how i could fix this? [email protected]:~# sudo apt-get updateHit http://security.debian.org wheezy/updates Release.gpgHit http://security.debian.org wheezy/updates ReleaseHit http://security.debian.org wheezy/updates/main amd64 PackagesHit http://security.debian.org wheezy/updates/contrib amd64 PackagesHit http://security.debian.org wheezy/updates/non-free amd64 PackagesHit http://security.debian.org wheezy/updates/contrib Translation-enHit http://security.debian.org wheezy/updates/main Translation-enHit http://security.debian.org wheezy/updates/non-free Translation-enHit http://ftp.us.debian.org wheezy Release.gpgHit http://ftp.us.debian.org wheezy ReleaseHit http://ftp.us.debian.org wheezy/main amd64 Pack